Blind hemming (optional) – SINGER W1766 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BLIND HEMMING (optional)
Fold the fabric as illustrated with the "wrong" side facing upwards.(f).
Place the folded fabric under the foot as shown.
Turn the hand wheel towards you by hand, until the needle swings over to the
far left It should then just pierce the fold of the fabric. (2) If it does not then
adjust the position of the fabric.
Once the correct position of the fabric has been set position the "guide" of the
foot (3) up against the fold (2) by turning the nut S
Proceed to sew carefully feeding the fabric to ensure it retains the correct posi
tion against the guide. (3) Note; Some practice will be needed to obtain the best
results. Always test the stitch first on a spare piece of fabric.