Sewing on buttons – SINGER W1766 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SEWING ON BUTTONS
1. Fit darning plate as described on page 12.
2. Use button presser foot and attach firmly.
3. Place button between presser foot and fabric and lower presser foot.
4. Manually turn hand wheel towards you ensuring that the needle enters into
both holes of button without obstruction.
(Increase or decrease width setting).
5. Sew about 7 stitches.
. Pull both threads to the underside and tie together.