Curved seams, Reinforcing end of seam – SINGER 1036 Creative Touch User Manual

Page 22

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CURVED SEAMS

1. Use a short stitch for elasticity and

strength. For example, if you use 12
stitches to the inch for straight seams,
select 15 to 20 stitches per inch to stitch

curved seams in the same fabric.

2. If you use the seam guide, available for

separate purchase at your Singer Sewing
Center, attach it at an angle so that the
edge that is closer to the needle acts as a
guide.

REINFORCING END OF SEAM

1. Stitch to the edge of the fabric. (Do not sew

beyond edge of fabric.)

2. Press stitch-length dial all the way down

and hold in place. Backstitch approx­

imately 1/2-inch to reinforce end of seam.
Reiease stitch-length dial.

3. Raise take-up lever to its highest position

and raise presser foot. Remove the fabric

by drawing it to the back and left.

4. Cut threads on thread cutter at rear of

presser bar.

stitching a Curved Seam

Reverse Stitching

17

Advertising
This manual is related to the following products: