*7b *7u^ead um macuine & needle, 7u^ead um macuine & needle – SINGER W3051 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

6.

*7b

*7U^ead Um MacUine & Needle

1.

Turn the balance wheel toward you to raise the needle bar

to its highest position,

2. Place a spool of thread on the spool pin.

3. Lead the thread through the arm thread-guides (Fig. 1 1 ) .

4.

Run the thread down through the thread-guide to the

tension discs From right to left and up.

Then draw the thread up through the deck spring.

5.

Take the thread up, through the thread guide and run the

end through the eye of the thread take-up lever from right

to left,

6.

Now run the thread down through the face plate guides

and then through the loop of the needle bar guide from

the back.

7.

Finally, run the end of the thread through the eye of the

needle

FROM

LEFT

TO

RIGHT,

drawing

it

through

about

3 or 4 inches.

Fig. n

Advertising