Flemme, ike q4joàk, Fo, a (lecfddjxue ike *7knead *7etfdia*i – SINGER W3051 User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

9. flemme, ike Q4Joàk

1. Raise the needle bar to its highest position by turning the balance

wheel toward you,

2. Raise the presserò foot by lifting the presser bar lifter.

3. Move the fabric back to the left and cut off the thread by passing

it over the thread-cutter above the presser foot.

4. Leave both ends of the thread a few inches long, under and to the

back of the presser foot.

fO, a (lecfddJxUe ike *7knead *7etfdia*i.

For ordinary stitching the tension of the upper and

lower threads should be equal so as to lock both

threads in the center of the material (Fig. 1 4 ) . If one

tension is stronger than the other, imperfect stitching

will

result.

Fine

materials

require

a

light

tension,

while heavy materials require more tension to obtain

a perfect stitch.

To INCREASE the tension, turn the thread tension

indecator (Fig. 15) clockwise.

TO

LESSEN

the

tension,

turn

the

thread

tension

indicator to the opposite direction. (When regulating

tension always have the presser foot down).

H

Fig. 14 Correct Stitch

Needle Threed Tension too strcn

Needle Thread Tension too weal

Fig. 15

Advertising