Flexi stitch patterns, Flexi stitches, Pattern groups selecting – SINGER 7021 Merritt User Manual

Page 54: Diseños puntadas flexibles, Puntos flexibles, Selección de los grupos de puntos, Fiexi, Swicp, Patterns

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

5. FLEXI STITCH

PATTERNS

In addition to straight and zig-zag stitches,

your machine can produce a variety of other

patterns.

Flexi stitches

These stitch patterns are used for sewing
knits and other stretch fabrics. Flexi Stitch
patterns are made by the side to side

movement of the needle along with the

backward and forward movement of the feed.

Pattern groups selecting

The knob localized to the right of panel on your

machine lets you choose

10

groups, each

containing

2

patterns.

Raise the needle to its highest position, adjust

the stitch width selector to straight stitch position

(------ ). This will see to It that the stitch pattern
selector will move far easier.

In order to single out the desired pattern group,

just turn the knob, sliding the indicator through
the panel, until it positions one of the pattern

groups you’ve chosen.

After carrying out the embroidery selection, turn

back the stitch width selector to the zig-zag po­
sition (

).

The flexi-stitch only accepts stitches works which

have numeration in red. Act upon the following
manner:

• Turn the stitch length dial to the left until the dot

on the dial lines up with the dot on the machine,
as shown.

Note: If for any reason the machine does not
start sewing your desired pattern after
aligning the two dot symbols, push-ln on the
reverse stitch button.

5. DISEÑOS

PUNTADAS

FLEXIBLES

Además de los puntos rectos y en zig-zag,

su máquina puede producir una variedad de

otros diseños.

Puntos flexibles

Estos diseños de punto se utilizan para coser

tejidos de punto y otros extensibles. Los
diseños de punto flexible se producen por

el movimiento de la aguja de lado a lado y
el del arrastre hacia atrás y adelante.

Selección de los

grupos de puntos

El selector localizado a la derecha del panel de

su maquina, le permite escojer

10

grupos

conteniendo

2

diseños cada grupo.

Levante la aguja hasta la posición mas alta.

Ajuste el selector de la anchura del punto en la

posición de costura recta (----- ).

Esto hara con que el selector del tipo de punto

se mueva mas fácilmente.

Para seleccionar el grupo de puntos deseado,

gire el selector hasta que el indicador, deslizando
por el panel le posicione a costura escojida.

Después de efectuada la selección del bordado,

vuelva el selector de la anchura en la posición del

zig-zag (/v^).

* •

La costura extensible permite solamente costu­
ras de puntos que poseen, en el panel.numera-

cion en rojo. Proceda de la siguiente manera:

• Gire el dial de longitud del punto hacia la

izquierda hasta que el punto sobre las líneas

del dial quede alineado con el punto de la
máquina, como se ilustra.

Nota: Si por alguna razón la máquina no
empieza a coser el diseño requerido después

de alinear los dos puntos, presione sobre el
botón de puntada reversible.

52

Advertising
This manual is related to the following products: