Punto sobreorillado inclinado no. 15, Slant overedge stitch no. 15, Punto sobreorillado incli nado no. 15 – SINGER 7021 Merritt User Manual
Page 60
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/719320/60/background.png)
Seams in knitted and stretch fabrics can be
joined and finished in one operation when
you use the slant overedge stitch.
Slant overedge stitch
no. 15
• Baste the garment together on the seam
line allowing for a 5/8" seam allowance
and fit in the usual way.
Required settings
Stitch Selection:
Slant Overedge no. 15
Stitch Width:
5 —wwvvwVVl^
1
1
Stitch Length:
At dot (•)
Foot-
General Purpose (B)
Needle Plate:
General Purpose (A)
• After making any adjustments, trim the
seam edge evenly to a 1 /4" from the seam
line basting.
• Place trimmed seam under the foot so that
the straight stitches fall on the basted seam
line and the zig-zag stitches fall over the
seam edge.
Punto sobreorillado incli
nado no. 15
Las costuras en tejidos de punto y elásticos
pueden unirse y rematarse en una sóla
operación, utilizando el punto de sobreoril
lado inclinado.
• Hilvane las prendas juntas sobre la línea
de costura dejando un borde de I
6
mm
Í
5
/
8
") y ajústelo en la forma usual.
Posiciones requeridas
Selección punto; Sobreorillado inclinado
no. 15
Anchura punto;
¡ —vvwWWVWl^
1
____
1
Longitud punto:
Al punto ( • )
Prénsatelas:
Uso general (B)
Plancha aguja:
Uso general (A)
• Antes de hacer cualquier ajuste, corte los
bordes de costura por igual a 6mm(1/4"
de la línea de costura hilvanada.
Coloque la costura ya recortada debajo
del prénsatelas de manera que los puntos
rectos caigan sobre la línea de costura
hilvanada y los puntos en zig-zag caigan
sobre el borde de la costura.
58