Ric-rac stitch no. 5, Punto recto flexible no. 3, Punto ric-rac no. 5 – SINGER 7021 Merritt User Manual

Page 58: Ric rac stitch no. 5, Straight stretch stitch no. 3

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

When you use the straight stretch stitch for

stress seam or to seam knitted, stretch and

elasticated fabric, both stretch and strength
are built into the seam as it is being sewn.
• Place garment right side up, under presser

foot,

straight stretch stitch

no. 3

Required settings

Stitch Selection:

Straight Stretch no. 3

Stitch Width:

Jjjj-vWW\/WVWlM

Stitch Length:

At dot (•)

Foot:

Special Purpose (J)

Needle Plate:

General Purpose (A)

• Lower the foot and start machine, holding

the thread ends as the first few stitches

are made.

• Guide the fabric lightly as you sew, letting

the machine make the backward and
forward stitches that give stretch to the

seam.

• Press seam after stitching.

Ric-rac stitch no. 5

This is a heavy-duty, stretch stitch that can
also be used for topstitching.
• Sew seams in usual manner and press.

For topstitching hard-to-reach areas,

convert machine to free arm sewing.

Required settings
Stitch Selection:

Ric-Rac Stitch no. 5

Stitch Width:

J —vvw\/\AA/y\^^

1

____

1

Stitch Length:

At dot (•)

Foot-

Special Purpose (J)

Needle Plate:

General Purpose (A)

• Place garment right side up, under foot.

• Slowly topstitch desired areas.

• Pull threads to wrong side of fabric; tie and

trim.

Punto recto flexible no. 3

Cuando utilice el punto recto flexible para
costuras básicas o al coser tejidos de punto,

extensibles o elastificados, se producen en

las costuras, según se realizan, tanto la

elasticidad como la fuerza.

• Coloque el derecho del tejido debajo del

prénsatelas.

Posiciones requeridas
Selección del punto: Flexible recto no. 3

Anchura punto:

Joj“WwwWWyyy\

Longitud punto:

Al punto ( • )

Prénsatelas:

Uso especial (J)

Plancha aguja:

Uso generai (A)

• Baje el prénsatelas y accione la máquina,

sujetando los extremos de los hilos
mientras se producen las primeras

puntadas.

• Guíe el tejido con suavidad mientras cose,

permitiendo que la máquina realice los
puntos hacia atrás y adelante que aporta

flexibilidad a la costura.

Punto ric-rac no. 5

Este es un punto de mucha fuerza, que puede
utilizarse también como pespunte visto.

• Cosa en la forma usual y planche.
• Para pespunte visto en áreas de dificil

acceso, convierta la máquina para coser

con base libre.

Posiciones requeridas
Selección del punto: Ric-Rac no. 5

Anchura punto:

5

vwwwvyyyy^^

1_1

Longitud punto:

Al punto ( • )

Prénsatelas:

Uso especial (J)

Plancha aguja:

Uso generai (A)

• Coloque la prenda del derecho debajo del

prénsatelas.

• Pespuntee despacio las áreas deseadas.

• Lleve los hilos hacia el revés del tejido,

anúdelos y córtelos.

56

Advertising
This manual is related to the following products: