How to use accessories – SINGER W167 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
If a four hole button is to be sewn, follow the
same procedure above for the two hole button. Now
lift presser foot slightly and move fabric to permit
stitching the remaining two holes. Hooks, snaps, etc.,
are sewn to the fabric with the same procedure as
for sewing two hole buttons.
HOW TO USE ACCESSORIES
narrow hemmer Fig. 31 >. For a plain narrow hem,
make a 1 8 inch double fold for about two inches
along edge of fabric. Hold each end of the two
inches fold, slip underneath hemmer. Bring fold up
into the scroll of hemmer, draw forward to end and
fasten with point of needle. Lower presser bar lifter.
Gently pull ends of thread as you start stitching.
Guide material slightly to right, and it will automatic
ally take a double turn through scroll.
LACE TRIMMED HEM To sew a narrow hem
and attach lace in one stitching, insert lace in the
slot next to needle i Fig. 32 i. Sew hem as above,
guiding lace under needle and hem into scroll.