The edgestitcher, Attachment foot, Attachment foot edgestitcher – SINGER W167 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
32
THE EDGESTITCHER
ATTACHMENT FOOT
In order to attach the binder, edgestitcher and the
hemmers, it is necessary to remove the presser foot and
replace it with the attachment foot, Fig. 44.
Mount
binder,
edgestitcher
or
hemmers
sliding
the
attachment to the left as far as possible and tighten screw.
The mounting slot enables you to sew as close to or
as far away from the edge as desired. Just move the
attachment to the correct position before tightening the
mounting screw.
The edgestitcher is used in making
lace insertion, edgings and pipings. The
slot serve as guides. To sew lace edging
to fabric, place the material you want
on top in slot. Fig. 45, and other piece
in slot 4.
To trim with a wide piping, place
the fabric in slot 4, and the fold of the piping, to the left in slot 3. For a narrow piping, place
the fablic in slot 2, and the folded edge of the piping to the right in slot 3.
Slot 5 may be used as a guide in stitching a french seam.