Cleaning and oiling the shuttle, Cleaning and oiling shuttle, 24 cleaning and oiling the shuttle – SINGER W167 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
24
CLEANING AND OILING THE SHUTTLE
The stitch forming mechanism occasionally becomes clogged with loose threads and
This will interfere with the efficient operation of the machine. Cleaning and removal of th^
will
Sc
1
.
2
.
3.
4.
5.
1
2
safeguard the performance. To' remwe“the shuttle assembly, proceed as follows.
Turn the balance wheel until the needle reaches its highest position. Tilt head back <
hinges.
Remove bobbin case i A i , Fig. 40.
Turn the two shuttle race cover clamps i B ' outward and remove the shuttle race cove.
and shuttle body i D).
1 1
u j i ■
Clean the shuttle race, the shuttle, and shuttle race cover by removing all threads, lin
Apply a drop of oil with finger tip to outer edge of shuttle. When the cleaning has
completed, proceed as follows to replace the shuttle assembly .
Turn the balance wheel until the needle reaches its highest position.
Place shuttle body, (D ', against shuttle driver and adjust into position.
A
(
D B
Fig. 39
Fig. 40