Threading the, Bobbin case – SINGER W167 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
THREADING THE
BOBBIN CASE
Step 1 (illustrated in Fig. 6).
Hold bobbin case between thumb
and forefinger of left hand, so that
the slot in the edge of the bobbin
case is on top.
Take the bobbin between thumb
and forefinger of right hand so'^that
the thread on top leads from left ^ to
right.
Step. 2.
Insert bobbin into bobbin case,
pull the thread into the slot of the
bobbin case as shown in Fig. 7, and
draw it under the tension spring and
into the fork-shaped opening of the
spring as shown in Fig. 8.
Fig. 6
Fig. 7
slot
;
Fig. 8
Advertising