Trouble chart – SINGER W167 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
TROUBLE CHART
27
Trouble
If machines
bind
Probable cause
Thread or lintfin rase way
Correction
1.- With take-up lever in highest posision,
tilt
head
back
on
hinges
and
remove
bobbin case.
2, - Turn clamps downward and remove race
cover.
3, - Remove hook.
4, - Clean thread and lint from all parts, in
cluding race.
5, - Run a drop of oil along rim of hook.
6, - Replace hook, then race cover. Snap
clamps into place.
7, - Grasp threaded bobbin case by latch and
replace, fitting tongue into notch of face
cover.
Advertising