How to set selectors for straight stitching, How to set selectors for zig-zag stitching – SINGER 7184 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
Before moving selectors, make sure needle is
out of the fabric.
How to set selectors for straight
stitching
• Needle Position: L i l i a
• stitch Width: ili{|| | f ^
• Stitch Length: .5 - 4 to suit fabric
How to set selectors for zig-zag
stitching
•
• Pattern Selector:
%
•
Needle Position: L i l i a
• Stitch Width:
III
• Stitch Length: .5 - 4 to suit fabric
1.
STITCH WIDTH SELECTOR
To produce a plain zig-zag or a decorative
stitch, the stitch width selector is moved from
its straight stitch position i to any of its other
five positions. The further you move the
selector lever toward the right, the wider your
stitch will be.
2.
NEEDLE POSITION SELECTOR
Most of your zig-zag stitching will be done in
centre Jm needle position.
Left 1. and right J, setting are used for
special stitch placement, as in button sewing.
3.
STITCH PATTERN SELECTOR
For plain zig-zag stitching, slide pattern
selector to 5 .
27