Gathering over a cord, Lace application, Flutter hem – SINGER W431 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
GATHERING OVER A CORD
Ordinary gathering with a basting stitch
often breaks while pulling in fullness. A
small zigzag across a cord such as crochet
thread or carpet thread, gives a much
stronger cord for gathering fullness into
fabrics. Once the gathers have been
stitched in place, the cord can be pulled
out in order to eliminate bulk.
Selector:
Length: 1 -2
Width: 2 3
Feed Dog: UP
Pressure: Full
Foot: All Purpose
LACE APPLICATION
Attaching laces or trims adds a special
touch to lingerie, dresses, or linens. Pin or
baste lace in place easing or mitering
corners where neccessary.
A straight edged lace or braid has a
convenient line to follow when sewing.
When using a scalloped edged lace follow
the design of the lace for an almost
invisible application.
Selector; IS
Length: 1/2-1
Width: 1-2
Feed Dog: UP
Pressure: Full
Foot; All Purpose
FLUTTER HEM
An unusual way of hemming or finishing
edges of tricot or soft knits is by a flutter
edge. Hemming in this manner is just like
overcasting an edge, but the fabric is
stretched in back and in front of the
needle as you sew. For best results, pull
the fabric equally, making sure the needle
goes over the edge. When you stop to
reposition your hands, keep the needle in
the fabric.
Selector: IS
Length: Near 0
Width: 3-4
Feed Dog: UP
Pressure: Full
Foot: All Purpose
29