Lace trimmed hem, Lace edge with invisible stitching, French seam – SINGER W431 User Manual
Page 49
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
t-'isF ^1-="
LACE TRIMMED HEM
To sew a narrow hem and attach
lace in one stitching, insert lace in
the slot next to needle.Sew hem as
shown, guiding lace under needle
and
hem
into
scroll.
Rickrack
stretch may be used in the same
way.
LACE EDGE WITH INVISI
BLE STITCHING
Hold lace 1/8 inch from raw edge
on right hand side of fabric. Insert
both in scroll, as for plain narrow
hem, let hem roll over and sew in
lace. When the stitching is complet
ed the hem is pressed on the wrong
side.
FRENCH SEAM
Place material with right sides
facing each other and the top piece
of material 1/8 inch from right
hand edge of lower piece. Insert in_
hemmer scroll allowing hem Xo roll
over and sew in top fabric making
French seam. For cording effect,
use zigzag stitch wide enough to
catch both edges of the narrow
rolled hem and sew with satin
stitch. This can be used for covering
chairs and so forth.