SINGER W431 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLING MACHINE HEAD ONTO PORTABLE CASE
OR CABINET-AND CONNECTING MACHINE
I
•
^ "kV'
m
■^1
Loosen both head hinge set screws
on the back of machine bed plate
until head hinge holes are clear.
Tilt head hinge pins up and back
as far as they will go.
Carefully slip machine head onto
hinges - making sure the head
hinge pins are inserted as far as
they can go into head hinge holes.
Allow machine head to rest in its
tilted back position.
Tighten both ^t screws securely
with screwdriver.
Plug electrical leads from machine
head into sockets located inside
cabinet or portable case. Cord
identified with "motor” tag must
be plugged into socket marked
"motor". Untagged cord goes to
"light" socket.
Insert plug into a wall outlet of
110-115 Volts.