SINGER W431 User Manual

Page 48

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

NARHUW HtJVlMtK

With needle at its highest position replace re­
gular presser foot with narrow hemmer and ti­
ghten it securely in place. Set stitch selector at
symbol !*. Stitch width control at 0 for straight
stitched hem or at number 2 for zigzag stitched
hem. Set stitch length control to suit.

For a plain narrow hem make a 1/8 inch double

fold for about two inches along edge of fabric.

Hold each end of the two inch fold, slip

underneath hemmer. Bring fold up into the scroll
of hemmer, draw fabric forward to end and
fasten with point of needle. Lower pre?ser bar

lifter. Gently pull end of thread as you start
stitching.

Guide material slightly to left and it will take a

double turn through scroll.
The narrow hem provides an excellent finish for
edges of ruffles or any other dainty work.

47

Advertising