Sewiimg tips, Shaping darts in interfacings – SINGER W431 User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SEWIIMG TIPS
When
a
dainty
hair
line
finish
is
particularly desirable for the inside seams
of sheer collars, facings, and yokes, seam
allowance that would ordinarily show
through is eliminated by following the
seam outline with a narrow zigzag stitch.
Trim seam allowance close to line of
stitching. Turn and press.
Selector: !S
Length: 1/2—1
Width: 1-2
Feed Dog: UP
Pressure: Full
Foot: All Purpose
SHAPING DARTS IN
INTERFACINGS
Cut interfacing down center between dart
lines. Overlap cut edges, matching dart
lines. Zigzag stitch along marking line
from point to wide end of dart. Trim
both raw edges close to stitching.
Selector:
Length: 1/2-1
Width; 1
Feed Dog: UP
Pressure: Full
Foot: All Purpose
30