Cleaning and oiling the shuttle area, Cleaning and oiling shuttle area – SINGER W431 User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CLEANING AND OILING
THE SHUTTLE AREA
The stitch forming mechanism occasional-
ly becomes clogged with loose threads
and hnt. This will interfere with the
efficient
operation
of
the
machine.
Cleaning and removal of the lint will
safeguard the performance
1. Turn hand wheel until the needle
reaches its highest position. Tilt head
back on its hinges.
2.
Remove bobbin
easel A).
3. Turn the two shuttle race cover clamps
IT)
outward and remove the shuttle
race coyer (C) and the shuttle body
L|
cleaner (D).
4. Clean the shuttle race, the shuttle, and
shuttle race cover by removing all
threads, lint, etc.
1. Turn hand wheel until the needle reaches its highest position
been snapped securely into position ^ aking certain the clamps have
4. Put bobbin (B) into bobbin case (A)
cot;Ter“" “ “ ' ‘ ' • ' " s
I d o f
39