Built-in buttonhole – SINGER W431 User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BUILT-IN BUTTONHOLE
This buttonhole eliminates the need for pivoting
the fabric. It is used most often on light and
medium weight woven fabrics.
1. Set the stitch width control for the black
square marked ¡1) buttonhole position. Lower
needle into the mark at the top left end of
buttonhole. Lower presser foot and sew on
the left side of buttonhole until you reach
the bottom end of buttonhole.
2.
Stitch width control to the ¡2-4) position
take a few stitch to bartack the bottom end
of buttonhole.
3.
With the needle up, turn the stitch width
control to the (3) position. Sew on the right
side of buttonhole. , At this position the
machine is feeding in reverse.
4. With the needle out of the cloth, turn again to
the {2—4) position and complete the button
hole by bartacking on the top end of button
hole.
5. To lock the stitches, make sure the needle is
out of the fabric and set width at 0. Then
take a few stitches.
6. To prevent cutting through the bartack insert
a straight pin through the bartack. Cut
buttonhole open.
Selector:
Length: Symbol n
Width:
¿-□-[J-p
Feed Dog: UP-DOWN
Pressure; Full
Foot: Buttonhole Foot
32