SINGER 221-1 Featherweight User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
38
THE RÜFFLER (Cont’d)
Attaching ruffle
• Place ruffle strip between two
blue blades and through first
separator guide.
• Place material to which ruffle
is to be attached between
separator blade and feed of
machine.
• Proceed as for plain gather
ing.
Right sides of fabrics are
placed together when the seam
is to fall to the inside.
GARMENT
39
THE RUFFLER (Cont’d)
Pleating
•
Move adjusting lever of ruffler to
desired
space
setting
for
pleats
either 6 or 12 stitches apart.
• Set stitch length.
For deepest pleat, activate adjusting
finger and turn adjusting screw inward
to its maximum setting. For smaller
pleats turn adjusting screw outward.
closely together; a long stitch sepa
rates the pleats for a greater distance.
• Insert fabric to be pleated between
blue blades and into first separator
guide.
• Lower presser bar and stitch.