SINGER 221-1 Featherweight User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

10

TO THREAD BOBBIN CASE

Hold bobbin case

and bobbin so

that thread leads

off in direction

shown above.

2. Place bobbin into

bobbin case. Pull

thread into slot 1.

Pull thread under

tension spring 2

and into slot 3 at

end of spring, as

shown.

11

TO REPLACE BOBBIN CASE

Hold bobbin case by latch and place it

on stud, having thread draw from top of

bobbin case.

Release latch and press bobbin case

back until latch enters groove in stud.

Allow about three inches of thread to

hang free from bobbin case and turn down

bed extension.

CAUTION: If throat plate is removed

for cleaning stitch forming mechanism,

etc., make certain, when replacing throat

plate, that position finger of bobbin case

base enters notch of position plate at­

tached to underside of throat plate, as

shown above.

Advertising
This manual is related to the following products: