SINGER 221-1 Featherweight User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
14
PREPARING TO SEW
point.
Hold needle thread lightly with
left hand.
Turn hand wheel so that needle
enters plate and brings up bobbin
thread.
Pull end of bobbin thread up
through needle hole in plate.
Lay both threads diagonally under
presser foot.
15
SEWING A SEAM
Set stitch regulator for desired
stitch length.
Position needle in fabric about
’/2
inch from edge.
• Raise stitch regulator to reverse.
• Lower presser foot.
Advertising
This manual is related to the following products: