SINGER 177 - Manual (Page 18)

1. Turn hand wheel toward you to raise needle
to its highest position.
2. Raise the presser foot.
3. Place spool of thread on the spool pin over
the spool pin felt.
4. Lead thread from spool through upper
thread guide, down around and between
tension discs, over tension thread guide,
under spring and up through eyelet in take-
up lever.
5. Continue to lead thread through all other
threading points shown.
6. Thread the needle from
right
to
left
drawing
about four inches of thread through eye of
needle.
THE NEEDLE THREAD
16