Getting ready to sew, Preliminary steps – SINGER 177 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2. Getting Ready to Sew
preliminary steps
CONNECTING MACHINE
Before plugging in your machine, be sure that
the electrical information on the motor bracket
conforms to your electrical power supply.
To connect the machine,
insert the power-line
plug into your electrical outlet.
OPERATING MACHINE AND
CONTROLLER
The speed controller controls the speed of the
machine.
To run the machine,
press the speed controller.
The harder you press, the faster the machine
will sew.
CAUTION:
IVe
recommend
that
you
unplug
your machine from the electrical outlet before
changing
needles,
removing
presser
foot
or
needle plate and when leaving the machine un
attended. This eliminates the possibility of start
ing
the
machine
by
accidentally
pressing
the
speed controller.