Straight stitching, Preparation, Starting to sew – SINGER 177 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3. straight Stitching
preparation
Before moving the stitch width selector, make
sure the needle is above the needle plate.
SETTING THE MACHINE
1. Press down on stitch width selector lever
and slide lever to right until groove in lever
is directly under the straight-stitch symbol
(setting
0
) .
For your convenience, the position numbers
0,1,2,3,4 will be used throughout this book
when the instructions require stitch width
settings.
2. Set stitch length selector for desired stitch
length. (See page 22 for instructions.)
starting to sew
1. Place needle and bobbin threads under
presser foot and draw them diagonally to
the back of machine.
2. Position the needle in the fabric where de
sired for stitching start.
3. Lowerthe presser foot and start the machine.
To sew perfectly on a wide variety of fabrics
adjust stitch length, pressure and thread ten
sion as instructed on following pages.
20