SINGER 177 User Manual
Page 56
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Removing and Replacing Shuttle
1. Raise take-up lever to its highest position.
2. Open slide plate, remove needle plate (see
page 52), and remove bobbin case.
3. Push latch down, swing shuttle gate open,
and remove shuttle from raceway.
4. Clean shuttle and raceway. Apply a drop of
oil to raceway.
5. Replace shuttle in raceway and close and
lock gate. Replace bobbin case and needle
plate; close slide plate.
Shuttle
Gate
Shuttle
Bobbin
Case
54
Advertising