Removing machine from cabinet – SINGER 177 User Manual
Page 62
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
removing machine
from cabinet
IMPORTANT:
• Do not attempt to remove hinges from cabinet
as this may result in damage to cabinet.
• Puil cabinet away from wall to avoid damage
to wall or machine.
• Remove power-line plug from electrical
supply.
TO REMOVE MACHINE FROM CABINET
1. Tilt machine back until it rests on hinges.
2. Loosen set screws that hold machine on
hinge pins by turning them counterclockwise.
3. Lift machine straight up and off pins. For
ease of removal, stand behind cabinet when
lifting machine.
TO REPLACE MACHINE IN CABINET
Reverse the procedure used for removal of
machine.
• Be sure set screws in machine are unscrewed
far enough to clear openings for hinge pins.
• To keep hinge pins pointing up, slip an elastic
rubber band around both pins, making sure
the elastic band is over the shoulder of each
hinge as illustrated.
• Be sure set screws are firmly tightened
against hinge pins before lowering machine
into cabinet.
60