Adjusting motor belt tension, Replacing the slide plate – SINGER 177 User Manual
Page 60
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
adjusting
motor belt tension
Tension on the motor belt should be just suf
ficient to keep the belt from slipping. If the
motor belt needs adjustment:
• Loosen motor bracket screw a full turn.
• To increase belt tension,
lower the motor
bracket.
• To decrease belt tension,
raise the motor
bracket.
• Securely tighten motor bracket screw.
replacing the slide plate
You will not have any occasion to remove the
slide plate. If it should accidentally become
disengaged from the machine, it is easily re
placed.
• Align back edge of slide plate with front end
of slide way.
• Push slide plate back until retaining spring
snaps into place.
58