Darts, Single threads darts – SINGER 414 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DARTS
Darts provide fit and contour in a gar
ment and should be accurately stitched.
A dart is usually stitched from the seam
edge, tapering, gradually to the point
where the last three or four stitches
parallel the fold. Stitch beyond the fabric
to form a thread cha'in V
2
to
V
a
inch in
length. Tie the thread ends into a single
knot close to the stitching.
Single Threads Darts —
Darts^ add styling and interest when
stitched with fold to outside of garment.
Thread ends at point of dart are elimina
ted wheiv single thread , principle is em
ployed.
Unthread needle. Use thread leading
off bobbin and rethread needle from back
to front. Tie bobbin and upper threads
together.
Draw
bobbin thread up
through threading^
points,
winding
enough
on
the
spool to complete
a single dart.
Lower needle into
edge of fold at
point of dart.
Lower foot and
stitch toward seam
edge.
26