Page 17, Procedure – SINGER 414 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
FREE MOTION WORK
Attaching Embroidery Hoop Guide —
Darning —
Procedure —
• Remove presser foot.
• Remove throat plate.
• Insert feed cover plate instead of regu
lar throat plate in the same manner as
described on
page 17.
Household linens, children's clothes and
knit wear of all kinds can be repaired
with the darning stitch.
Procedure —
• Trim away any ragged edges from the
area to be darned. Centre the worn
section in embroidery hoops' to hold
it taut.
•
Set stitch length regulator in neutral
position (no feeding motion).
27
Advertising