The ruffling blade, The separator guide, Preparation – SINGER 414 User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
THE RÜFFLER
Activating Parts. The ruffling blade and
the separator blade
are of blue steel and
hold the material to be gathered between
them.
The ruffling blade
forms the gathers
or pleats by carrying the fabric to the
needle according to the spacing and full
ness to which the ruffler is adjusted.
The
separator guide
is slotted to guide seam
edges evenly and to separate the ruffle
strip from the material to which the ruffle
is attached.
•
Set adjusting lever on Number 1 set
ting and throw adjusting finger out of
action.
•
Turn adjusting screw for amount of
fullness desired and set stitch length
to space fullness. For maximum full
ness, turn adjusting screw in to its
limit; turn outward for less fullness.
Gathering —
Preparation —
• Raise needle to its highest point.
• Locate attachment on machine in place
of regular presser foot, at same time
fit fork arm over needle clamp screw.
Make sure both presser bar screw and
needle clamp screw are tightened secu
rely.
44