Electrical information the singer* electric motor, Before inserting electric plug a, Electrical connections for machine – SINGER 414 User Manual
Page 58: Speed controller
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ELECTRICAL INFORMATION
THE SINGER* Electric Motor
in the electric
machine is furnished for operation on an alter
nating or direct current. Orders must state the
catalogue number of the motor, or the voltage,
and in the case of alternating current, the
number of cycles. '
Before Inserting Electric Plug A,
be sure that
voltage and cycles stamped on electrical name
plate
B
are within range marked on your elec
tric meter installed by your power company.
Electrical Connections for Machine.
Push 3-pin
terminal plug
C
on 3-pin terminal block at right
Of machine and connect plug
A
at other end of
cord to electric outlet.
Speed Controller.
The speed of machine is
regulated by amount of pressure on the pedal
of the foot controller D or the knee lever.
56