Page 53, Pages 7 – SINGER 414 User Manual
Page 52
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
TREADLE INFORMATION
To Replace Belt —
• Remove arm top cover as instructed
on
page 53.
• Remove belt guard by removing screw
located at top of guard.
\
Insert end of belt into cutout
A
so that
it enters groove in hand wheel.
Lead belt down through hole provided
in machine casting.
Insert opposite end of belt into cutout
B
in bed of machine.
Lead belt through guide
C,
around
band wheel, and into eye of belt
shifter
D.
Join both ends of belt.
Replace arm top cover.
Replace belt guard.
Operate treadle as instructed on
pages 7
to
9.
NOTE:
Tension on belt should be only heavy enough to keep belt from slipping.
50
Advertising