SINGER 414 User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CORDED WELTING
Cable cord comes in a variety of sizes.
When covered with a firmly woven fabric,
it makes a corded welting. that is an
excellent seam finish.
This welting is prepared in advance
and then stitched into the seam.
• Cut a true bias strip IV
4
inches wide,
plus three times the width of the cord
of either self or contrasting fabric.
# Sew strips together on the lengthwise
grain to obtain desired length.
•
Adjust zipper foot to the left side of
the needle.
• Encase the cord in the bias strip, raw
edges even.
• Lower presser bar.
• Stitch close to th« cord, using a stitch
length slightly longer than for seam
ing the weight of fabric being used.
Do not crowd the stitching against the
cord.
36