Lace applied under hem – SINGER 414 User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
• Fold and start hem the usual way.
•
Starting about 1" down from end of
lace, place selvage under needle to
hold lace firmly.
• Raise foot slightly and slip lace under
back portion of foot, without disturbing
position of fabric.
•
Stitch slowly, guiding fabric with left
hand, the lace with right.
Take care not to stretch the lace.
Lace Applied Over Hem —
Lace Applied Under Hem —
Proceed the same way as when making
a hemmed seam.
• Slip lace in from the left as you would
the second piece of fabric.
This method is used where a neat finish
is desired on both sides of the material.
40
Advertising