Needle insertion, Long groove toward you – SINGER 414 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
NEEDLES AND THREAD
This machine uses a Cat. No. 2020
needle (15 X 1).
Sizes 9, 11, 14, 16 and 18.
For perfect stitching, select correct
needle and thread to correspond with
fabric. Be sure to use like threads for
both needle and bobbin.
NEEDLE INSERTION
Raise needle bar to highest point by
turning hand wheel toward you.
Loosen needle clamp screw.
Insert needle upward into clamp as far
as it will go, with flat side of needle to
back and
long groove toward you.
Tighten needle clamp screw.
Long groove
toward you
6
Advertising