Procedure – SINGER 414 User Manual
Page 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MULTI-SLOTTED BINDER
Adjusting
lug \
Slots for
folded
bias tape
Scroll for
unfolded
binding
Guide pins
Centre slot
of scroll
The multi-slotted binder is used to apply
commercial binding as well as self fabric
bias to an unfinished edge.
This colourful trim is attractive when
applied to children's wear, aprons and
fabric furnishings. It is a practical finish
foi seam edges that ravel and for making
bound seams.
Cut binding diagonally to form a long
point. Commercial binding in sizes 1 to 5
is inserted from the right into the appro
priate slot in the scroll. Unfolded bias
^Vi
6
of an inch wide is inserted into the
opening at the end of the scroll.
Procedure —
•
Attach binder to presser bar in place
of regular presser foot.
•
Pull binding through scroll until the
evenly folded edges are under the
needle. The free length of the binding
is held between the guide pins.
• Insert edge to be bound into centre of
scroll.
•
Position stitching close to edge of
binding by moving scroll portion of
attachment to right or left by means
of adjusting lug.
41