Anti- trap protection, Resetting the electric sliding door – Dodge 2008 Sprinter User Manual

Page 100

Advertising
background image

98

Controls in detail

Opening and closing

3

̈ Make sure that the doors are closed.
̈ Switch on the ignition (୴ page 111).
̈ Press and hold the upper part of

relevant switch 1 or 2 on the cen-
ter console for 5 seconds.

The indicator lamp in the switch for
the sliding door concerned flashes
and a warning tone sounds three
times as confirmation.

Anti-trap protection

If the sliding door is obstructed during
the opening procedure, it moves back in
the opposite direction slightly and stops.

If the sliding door is obstructed during
the closing procedure, it opens fully
again.

Resetting the electric sliding door

In the event of serious malfunctions or if
you disconnect the battery, you will
need to reset the sliding door.

Warning

G

The anti-trap protection function does not
eliminate the possibility of fingers or other
parts of the body being trapped against
the door frame and therefore does not
eliminate the risk of injury.
Always make sure that nobody is within
the operating range of the sliding door.

i

The anti-trap protection is pro-
grammed to be less sensitive when
you press and hold the switch on the
center console or the switch in the
doorway than when the door opens
of its own accord.

nf_BA.book Page 98 Friday, January 25, 2008 3:53 PM

Advertising