Dodge 2008 Sprinter - Manual (Page 128)

126
Controls in detail
Seats
3
Installing the rear bench seat with 2
or 3 seats ̈ Observe the specified installation lo-
cation for the rear bench seat.
A rear bench seat with 2 seats may
only be installed left-sided.
̈ Check seat mounting cups 2 on the
vehicle floor.
Seat mounting cups 2 must be kept
free from dirt and foreign objects.
̈ Position the rear bench seat in the di-
rection of travel in respective seat
mounting cups 2.
̈ Slide the rear bench seat forward un-
til you hear the locking mechanisms
engage.
̈ Check levers 1 on the bench seat
feet.
All levers 1 must be parallel to the
vehicle floor.
1 Lever
2 Seat mounting cups
nf_BA.book Page 126 Friday, January 25, 2008 3:53 PM