Dodge 2008 Sprinter - Manual (Page 70)

68
Safety
Emergency exit
2
̈ To open: turn both handles 1 to a
vertical position. This releases the
safety bolts 2.
The window is unlocked.
̈ Use the handles to push the window
outward and hold it steady. Make
sure you have enough space to do
this.
̈ To close: close the window.
̈ Turn both handles 1 to a horizontal
position. Make sure that the locking
mechanisms 3 are located on the
inside of the window frame.
The window is locked.
̈ Renew the safety bolts 2 before dri-
ving the vehicle again.
Please contact your authorized
Sprinter Dealer for information about
how to do this.
Warning
G
If you continue your journey without clo-
sing and locking the emergency exit win-
dow, it may come out of its frame and
cause an accident.
You should, therefore, check the locking
mechanism and safety bolts on the emer-
gency exit window before setting out.
The emergency exit window may only be
opened when the vehicle is stationary.
! CAUTION
Make sure there is enough space to
open the emergency exit window.
You must hold the open window in
position. Otherwise, you could dam-
age it.
nf_BA.book Page 68 Friday, January 25, 2008 3:53 PM