Dodge 2008 Sprinter User Manual
Page 440
438
Practical hints
What to do if ...
5
The engine does not start.
You cannot hear the starter motor working.
The on-board voltage is too low (the battery has
too little charge or is discharged).
The selector lever is not in position P or N.
̈ The engine may be jump-started
(
୴ page 581).
If the engine does not start despite jump-
starting:
̈ Consult an authorized Sprinter Dealer.
The battery isolating switch is disconnected.
̈ Switch on the electrical system
(
୴ page 338).
Vehicles with a gasoline engine:
The engine is not running smoothly and it is
misfiring.
The engine electronics or a mechanical compo-
nent of the engine control has malfunctioned.
̈ Do not use too much throttle.
̈ Have the cause rectified immediately at
an authorized Sprinter Dealer.
Otherwise, unburned fuel may get into
the catalytic converter and damage it.
Problem
Possible cause/ result
Suggested solutions
nf_BA.book Page 438 Friday, January 25, 2008 3:53 PM