Dodge 2008 Sprinter - Manual (Page 369)

367
Operation
Tires and wheels
4
In addition to the placard also con-
sult the tire inflation pressure table
(
୴ page 628).
̈ If necessary, add air to achieve the
recommended tire inflation pressu-
re.
̈ Reattach the valve cap.
̈ Repeat this procedure for each tire.
Checking tire inflation pressure elec-
tronically with the Tire Pressure Mon-
itoring System (TPMS)* (vehicles
without steering wheel buttons)
i
If you have overfilled the tire, release
tire inflation pressure by pushing the
metal stem of the valve with for ex-
ample a tip of a pen. Then recheck
the tire inflation pressure with the
tire gauge.
! CAUTION
After inspecting or adjusting the tire
inflation pressure, always reattach
the valve cap if equipped.
This will prevent moisture and dirt
from entering the valve stem, which
could damage the valve stem. i
USA only:
The Tire Pressure Monitoring System
(TPMS) is equipped with a combina-
tion low tire pressure/TPMS mal-
function telltale in the instrument
cluster (
୴ page 20). Depending on
how the telltale illuminates, it indi-
cates a low tire pressure condition or
a malfunction in the TPMS system it-
self:
nf_BA.book Page 367 Friday, January 25, 2008 3:53 PM