To raise the belt height, To lower the belt height, Srs ( supplemental restraint system) – Dodge 2008 Sprinter User Manual

Page 43: Srs warning lamp

Advertising
background image

41

Safety

Occupant safety

2

̈ To raise the belt height: slide belt

sash guide 1 upward.
Belt sash guide 1 engages in vari-
ous positions.

̈ To lower the belt height: press and

hold release button 5.

̈ Slide belt sash guide 1 to the de-

sired height.

̈ Let go of release button 5 and

make sure that belt sash guide 1
engages.

The SRS (Supplemental Restraint Sys-
tem) may consist of the following com-
ponents, depending on the equipment
level:
ț 1 warning lamp
ț Emergency tensioning retractors
ț Belt force limiters
ț Airbag system with:

ț Airbag control unit
ț Airbags

1 warning lamp

The SRS performs a self-test at regular
intervals when the ignition is switched
on and while the engine is running. Mal-
functions can therefore be detected in
good time.

The 1 warning lamp in the instru-
ment cluster (

୴ page 20) comes on for

approximately 4 seconds when you
switch on the ignition.

SRS (Supplemental Restraint
System)

nf_BA.book Page 41 Friday, January 25, 2008 3:53 PM

Advertising