Dodge 2008 Sprinter - Manual (Page 555)

553
Practical hints
Flat tire
5
̈ Push the wheel onto the wheel hub
and press it on.
Wheels with centering by wheel bolts:
̈ Screw in the wheel bolts and tighten
them finger-tight. 1 Wheel bolt for light-alloy wheel
2 Wheel bolt for steel wheel
or wheels with wheel nuts:
! CAUTION
If your vehicle is equipped with the
tire pressure monitor, each wheel
has an electronic component.
Tire mounting tools should not be ap-
plied in the area of the valve, as this
could damage the electronic compo-
nents.
Have the tires changed only at an
authorized Sprinter Dealer.
Warning
G
Do not tighten the wheel bolts and wheel
nuts completely while the vehicle is still
jacked up. The vehicle could tip.
i
On vehicles with light-alloy wheels,
you will find short wheel bolts suit-
able for the steel spare wheel in the
vehicle tool kit.
N40.10-2175-31
nf_BA.book Page 553 Friday, January 25, 2008 3:53 PM