Dodge 2008 Sprinter User Manual
Page 566
564
Practical hints
Flat tire
5
a Valve core extractor
b Hook
c Knob
d Angle bracket
e Tire valve
̈ Pull knob c out of valve core
extractor a as far as the stop.
̈ Screw valve core extractor a clock-
wise onto tire valve e.
̈ Press knob c into the valve core of
tire valve e, turning it gently as you
do so, until the shaft of valve core
extractor a engages.
̈ Turn knob c counterclockwise until
the valve core is unscrewed.
̈ Pull knob c out of valve core
extractor a as far as the stop.
This pulls the valve core into the
valve core extractor and seals it
against the valve core extractor stop.
̈ Hook tire sealant bottle 8 into the
upper vent hole in the wheel using
hook b.
̈ Press angle bracket d on hose of
tire sealant bottle 8 to the stop on
the flange of valve extractor a and
clamp it in place.
̈ Make sure that the pressure release
screw on pressure gauge 5 is
closed.
nf_BA.book Page 564 Friday, January 25, 2008 3:53 PM