3xLOGIC VIGIL Server - Manual (Page 127)

10.1 General Tab
Auto-Start
Recorder
When enabled, the VIGIL Server starts recording footage as soon as the VIGIL Server program is launched.
When disabled, the user must manually start the recorder using the controls in the Recorder Controls window.
Network Logging Logs network activity that can be reviewed in the Network Log Analyzer.
Redundant VIGIL
Server
This feature only applies to Analog Cameras. A redundant VIGIL Server is used for backup recording in
case of a VIGIL Server failure. If Redundant VIGIL Server is enabled, the Sentinel service will not display an
error if there is no footage recorded in 24 hours. Redundant VIGIL Servers are normally used only in systems
set up with VIGIL Server Health Monitor configured to use a Matrix switch for failover. Please contact 3xLOGIC
for more information about this feature.
Close Live On
Playback
When enabled, the Live Viewer window will close when the Search window is opened in order to conserve sys-
tem resources.
Close Playback on
Live
When enabled, the Search window will close when the Live Viewer window is opened in order to conserve sys-
tem resources.
Hide Minimize
Maximize Buttons
When enabled, hides the Minimize and Maximize window buttons on the main VIGIL Server screen.
Watchdog
When enabled, the watchdog circuit on the video capture card is used to verify that VIGIL Server is responsive.
If the software becomes unresponsive, then the watchdog will reboot the VIGIL Server. You can test that the
watchdog circuit is functioning by clicking the Test Watchdog button. The VIGIL Server should reboot within a
few minutes if the watchdog is functioning correctly. This function only works with Analog Capture Cards that
support this feature. This Feature is not available on NVRs.
Screen Saver Starts the VIGIL screen saver after a set number of minutes of system inactivity have lapsed.
Show Acknowl-
edgeable Errors When enabled, the Error Alert window will display if an error is recorded in the Audit Log; this window will dis-
play until the error has been acknowledged by a user.
3xLOGIC's VIGIL Server 7.1 User Guide
Pg. 123