3xLOGIC VIGIL Server User Manual
Page 166
Audio Talk Device Settings
Audio Talk Device settings are used to configure Remote Audio Talk Devices for use on the VIGIL Server. These can be
IP Cameras or IP Audio Devices.
Name
Enter a name for the Audio Talk Device. This can be
used to describe the location of the Audio Talk
Device.
Type
Select the type of Audio Talk Device. This can be an
Audio Talk capable IP Camera or IP Audio Device.
Address
The IP address of the Audio Talk Device.
Data Port
The Data Port used on the Audio Talk Device.
RTSP Port
The RTSP Port used on the Audio Talk Device.
User Name / Pass-
word
The user name and password for the Audio Talk
Device.
Live Audio Settings
Force to User Soft-
ware Live
When enabled, live audio will be routed through the VIGIL Server’s audio output instead of the capture
card’s audio output. This function is only available with some capture cards.
Audio Storage Drives
Create and configure Audio Storage Drives.
Audio Storage Drives are defined in the same way as Video Storage Drives. It is recommended that the Audio Storage
Drive be on a different drive than the Video Storage Drive(s).
Audio Talk / Chat
Audio Device
Select the audio device that will be used by the VIGIL Server for voice communication in Audio Talk Mode.
Set to ‘none’ to disable Audio Chat.
3xLOGIC's VIGIL Server 7.1 User Guide
Pg. 162