3xLOGIC VIGIL Server - Manual (Page 72)

Selecting a SubStream VIA the ONVIF Device Manager
To enable a camera to use its substream capabability, navigate to the desired camera on the ONVIF Device Manager
and select Profiles(circled in red, below.) The ONVIF Device Manager should extend and reveal the Profiles tab. Select
the desired profile/substream from the profile selection menu(circled in black, below.) To configure a selected sub-
stream, click Select(circled in blue, below.)
3xLOGIC's VIGIL Server 7.1 User Guide
Pg. 68